Sinks made of stainless steel for washing dishes have long become an indispensable attribute of the modern kitchen. This article will learn about the main types of such equipment and what to look for when buying.

Following are the selection of the most successful models of stainless steel kitchen sinks

1. Built-in kitchen sink 43.5 cm Qulin OL-357 satin

1. Built-in kitchen sink 43.5 cm Qulin OL-357 satin

Design features – This sink must be installed in a kitchen cabinet that is at least 45 cm deep. It has one bowl with a 3 ½” center drain and a side overflow hole. The 20 cm depth of the sink reduces splashes and allows you to place large enough pots or many standard plates in it. The metal is thick sufficient at 1 mm to resist bending under any good strain. On the backside, the steel is covered with a noise-insulating layer.

1. Design.

Design – The sink is a round bowl with an angle in the far part for installing a mixer. It looks equally good in the center of a straight countertop and the corner of a kitchen unit. The front side of the product is sanded to a mirror finish.

Equipment – The sink comes with a stylish high-spout mixer tap. The kit also includes hardware, a siphon with an overlapping drain, and a mat.

2. Flush-mounted kitchen sink 60.5 cm IDDIS Arro ARR60Sri77

2. Flush-mounted kitchen sink 60.5 cm IDDIS Arro ARR60Sri77

Design features –  A rectangular sink measuring 60.5×44.0 cm with a 3 ½ “drain hole is made of a steel sheet 0.8 mm thick. The depth of the bowl is 18 cm. There is a wing on the side to accommodate washing utensils. Overflow protection is provided. The mixer is located in the far corner. The back surface of the metal is covered with an additional layer of porous material to reduce noise.

2. Design.

Design – The rectangular sink with rounded corners fits well into any point of the kitchen set. The facial surfaces have been brought to a state of silk luster, which gives a feeling of impeccable cleanliness. The embossed pattern on the side shelf adds a touch of elegance to the product.

Equipment – The sink comes on sale with a set of fasteners, a drain plug filter, a mixer with a high spout.

3. Flush-mounted kitchen sink 53.5 cm Blanco Rondoval brushed steel

3. Flush-mounted kitchen sink 53.5 cm Blanco Rondoval brushed steel

Design features – A round sink with dimensions of 53.5×49.0 cm has one bowl measuring 39x39x18 cm. Steel thickness is 0.6 mm. The 3 ½” drain hole is not located in the center of the sink but closer to the back wall, which gives additional space inside the cabinet. The faucet is slightly shifted to the right to install the product very close to the kitchen backsplash.

3. Design.

Design – The model is exceptionally laconic. The top surface of the sink and the bowl itself are two eccentrically located circles. Brushed steel does not give a bright shine, looks stylish, and does not get dirty quickly.

Equipment – The product is sold, complete with hardware and drain plug. The siphon and mixer must be selected independently.

4. Inset kitchen sink 58 cm Seaman Eco Wien SWT-5848 silver

4. Inset kitchen sink 58 cm Seaman Eco Wien SWT-5848 silver

Design features – The rectangular sink was wide enough with a ledge on the far wall to accommodate a mixer. Fits on a 58×48 cm section of a worktop. It can be installed almost close to the apron. The depth of the bowl is 20 cm. The drain hole is located in the middle. Wall thickness 0.8 mm. The bottom has a sound-insulating layer.

Design – A large and convenient sink is suitable for installation on straight sections of a kitchen set. The design is exceptionally laconic, which emphasizes the high functionality of the product. Silver-colored walls look good in the interior of a modern kitchen, but they require careful maintenance.

Equipment – The sink is sold with a set of fasteners and a drain fitting. The buyer completes the rest on his own.

5. 62 cm inset sink Zorg Sanitary PVD SZR-6249 BRONZE

5. 62 cm inset sink Zorg Sanitary PVD SZR-6249 BRONZE

Design features – The sink of this brand will fit into a rectangle measuring 62×49 cm. The bowl dimensions are 33.5×42.0x18.0 cm; the rest of the area is occupied by a wide wing on the left. Here is the place of installation of the mixer. The wall thickness of 0.9 mm is enough to prevent the product from sagging under the weight of many dishes. The drain hole has a standard diameter of 3 ½”. Noise-suppressing pads are glued to the entire bottom on the reverse side.

Design – The oval sink is painted in bronze and is perfect for a retro kitchen. Matt surfaces are easy to clean and leave no residue.

Equipment – The sink comes from the manufacturer with a mounting kit, a strainer fitting, and a drain siphon.

6. Inset sink 50 cm OMOIKIRI Amadare 50-IN

6. Inset sink 50 cm OMOIKIRI Amadare 50-IN

Design features – The rectangular sink 50.0×50.5 cm has a bowl measuring 45x40x20 cm. With a wall thickness of 1 mm, it perfectly holds its shape. Tap hole in the center of the back.

Not far from it is a 3 ½” mesh drain and an overflow fuse. The outer surfaces are covered with elastic material to absorb loud sounds.

6. Design

Design –  A washbasin with a small corner radius gives the impression of a regular square. It will perfectly fit into the interior of any strategy, from minimalism to classic. All horizontal surfaces of the side shelves have no relief and lie in the same plane. The effect of almost sterile cleanliness is complemented by the walls, perfectly processed to a mirror finish.

Equipment – The product is sold with a mounting kit and a hydraulic drain plug.

7. Flush-mounted kitchen sink 65 cm FLORENTINA Combi 650 champagne

7. Flush-mounted kitchen sink 65 cm FLORENTINA Combi 650 champagne

Design features – The rectangular sink with dimensions of 65×51 cm stands out among analogs with a bowl depth of 23 cm. It is made of high-quality AISI 304 stainless steel with a thickness of 1 mm. The drain is fitted with a 3 ½” filter plug. There is an overflow preventing overflow.

A wing with a stepped relief occupies a significant part of the shell area. The upper face surfaces are covered with a quartz composite for increased wear resistance. There are four options for installing the mixer and water supply. On the back, some overlays reduce the volume of the falling jet of water.

7. Design

Design – The combination of stainless steel and artificial stone gives the sink a unique chic. The color of the quartz composite does not contrast with the base material.

Equipment – The delivery set includes:

  • Fasteners.
  • A bottom siphon with an overflow connection.
  • A stencil for cutting a mounting hole.

8. Integrated kitchen sink 44.5 cm OMOIKIRI Omi 44-U / IF-IN Quadro

8. Integrated kitchen sink 44.5 cm OMOIKIRI Omi 44-U IF-IN Quadro

Design features – Almost the entire space of a small kitchen sink measuring 44.5×44.5 cm is occupied by a square bowl 40x40x15 cm. The thickness of the metal is 0.8 mm. There are three installation options: flush with the worktop, on top of it, and below the worktop level. Standard drain 3 ½ inches. All rear surfaces are covered with a porous material to reduce noise.

Design – Design is entirely subordinate to functionality. Nothing extra is visible from the outside. High-quality grinding of internal surfaces does not leave the hostess a chance to avoid regular cleaning.

Equipment – The sink comes with a mounting kit, a sealing gasket, a siphon that connects to the drain, and overflow holes.

9. Kitchen sink 50 cm OMOIKIRI Kashiogawa 79-IN 79×50 cm

9. Kitchen sink 50 cm OMOIKIRI Kashiogawa 79-IN 79x50 cm

Design features.  The 79×50 cm sink is equipped with a sufficiently sizeable embossed wing, located on the right and left—Bowl 16 cm deep, made of a 0.7 mm stainless steel sheet. The combined anti-noise coating of the backside consists of a continuous layer obtained by vacuum deposition and an additional rubber bottom pad. The diameter of the drain hole is a standard 90 mm. A decorative filter is embedded in it.

Design.  The shape and dimensions of the sink are suitable for straight and corner sections of the countertop. The laconic design will fit into the kitchen interior of any style.

Equipment.  Includes a set of fasteners, drain fittings, and a siphon.

10. Overhead kitchen sink 50 cm Mixline 60×50 (0.8) 3 ½ gloss

10. Overhead kitchen sink 50 cm Mixline 60x50 (0.8) 3 ½ gloss

Design features – This sink will fit a cabinet that is at least 55 cm wide. It is made of a 0.8 mm stainless steel sheet. The size of the bowl is 40x35x18 cm. The drain hole is standard 3 ½ “with a filter inserted into it. On the backside, a layer of sound insulation is glued.

Design – An exciting combination of a rectangular sink body with an oval bowl. Sufficiently wide rear shelf with mixer installed on it. The slope of surfaces towards the drain is provided. The front side is sanded to a mirror finish.

Equipment – The sink is sold with a fully equipped drainage device.

11. Flush-mounted kitchen sink 49 cm Mixline d49 (0.8) 3 ½ gloss

11. Flush-mounted kitchen sink 49 cm Mixline d49 (0.8) 3 ½ gloss

Design features.  The body of the sink is a perfect circle with a diameter of 49 cm. The 0.8 mm thick metal keeps its shape well. A bowl with a diameter of 35.6 cm has a depth of 18 cm sufficient for washing dishes. On the backside, a wide rubber ring is glued to it to absorb sounds. There is a drain hole with a cross-section of 90 mm, a side overflow, and a place for installing a mixer. There are 6 points of attachment to the tabletop around the circumference.

Design. The sink in the form of two eccentrically arranged circles creates a futuristic effect with a mirror-like shine. Such a product will organically fit into any modern interior.

Equipment. The sink comes with a hardware kit, gasket, and siphon assembly.

12. Overhead kitchen sink Kaiser 600×500 0.8 mm chrome

12. Overhead kitchen sink Kaiser 600x500 0.8 mm chrome

Design features. The sink is suitable for installation on a cabinet measuring 60×50 mm. She has a square bowl with smoothly rounded corners with dimensions of 40x40x18 cm. The thickness of the metal is 0.8 mm. Faucet holes, drain (90 mm), and overflow is provided. A pad of porous material is glued to the bottom.

Design. Precise proportions (square in the rectangle), laconic design, and polished surfaces to a chrome luster give the sink a neat and hygienically tidy appearance.

Equipment. The product is sold complete with fasteners and all necessary bottom piping.

Ad